September 25, 2018
The small trickle of liquid from underneath your car is a sign of possible car trouble. Don’t just dismiss it as a little thing. In fact, now’s a good time to check your car yourself or take it to the nearest automobile repair center in Salt Lake City.
Here’s a tip: knowing the type of fluid that’s leaking from your car helps you determine which part of your car needs attention, as well as the severity of the problem in your hands. You can usually tell the type based on its color.
Brake Fluid Leaks
Brake fluid is mostly clear when it’s still new. It darkens over time, though. If your car leak is clear to slightly yellow, similar to white wine, or a light to dark brown color, you need to have a professional service your car.
Situated at the front of your vehicle, brake fluid affects the hydraulic pressure system of your car. Leaking brake fluid causes a drop in hydraulic pressure that could lead to brake failure. Call your trusted repair shop to have it towed to avoid getting into a car accident.
Transmission Fluid Leaks
If your car leak is a deep red or a dark reddish-brown color, then the trouble is likely with the automatic transmission fluid. Transmission fluid is oily, viscous, and has a sharp odor. It acts as a lubricant to allow for smoother shifting of gears.
Transmission fluid leaks usually occur around the front or middle part of your car. Driving with a leaking transmission is not as dangerous as driving when your brake fluid is leaking, but it can severely damage your car’s automatic transmission and cost you at least $4,000 for a replacement.
Traditional coolant or antifreeze is color green, although newer cars may have bright orange, pink, or blue coolant.
Antifreeze regulates your engine’s temperature and prevents it from overheating. Excessive engine noise and reduced performance are two signs of a car low on antifreeze. Coolant leaks are usually spotted near the radiator hose and heater hose.
Keeping a close eye on your car for possible problems not only helps extend its lifespan but also reduces the risk of car accidents. Make sure to have a reliable auto repair shop on call for any emergency and to help you take better care of your car.
August 9, 2018
When you see an all-terrain vehicle, you’ll surely have the impression that the owner is leading an active lifestyle. You may even think that they go on holidays every weekend at the foot of the mountain for some active driving.
But, ATVs are actually more than just that. They have other uses that may even surprise you. If you’re considering to buy a preowned ATV in Salt Lake City, you may want to read this guide. The pointers and examples below will illustrate how you can use and maximize your ATV in more ways than one:
Use it as a mower
If you’re planning to use your ATV at home, you can use it to cut grass — but not actually to cut, but to aid in cutting. Just attach a pull-behind mower onto the backside of the ATV, drive across the lawn, and cut the grass. You may choose to replace the wheels of the ATV to avoid damaging the lawn.
Use it to rake or plow your soil
If you’re living on a farm, you can use your ATV to prepare your soil for planting. The best way to use it is turning it into a plower. Just attach a rake or a set of sharp objects onto the backside of the ATV, drive away, and rake the soil.
Use it for hunting
If you are going on an adventure, you can take it a bit further through hunting. You can use the ATV to go to hunting sits or to carry supplies. Just adjust the engine of the ATV to make it less noisy, so as not to drive away the game animals.
These are just some things to keep in mind if you want to make use of your ATV in more ways than one. Choose the unit that is easy to customize.
June 27, 2018
Buying auto spares can be costly and tedious, especially for someone shopping for them for the first time. For you to keep your car in its best performance, you’ll want quality parts for it. However, quality shouldn’t compromise on costs. Here are tips for a buyer who looks forward to getting quality parts that don’t break their bank.
Understand what you want
The first step to buying unique and rare spares such as Maxima car parts is to know the model of your car and the pieces that fit into it. Peruse through the manual to understand your car specifics. Try locating them from your local stores and online shops. The ability to pinpoint that particular part that you want doesn’t just instil confidence when you go to buy but also makes work more comfortable for the dealer to shop for one for you in case they lack in their store.
Consider the pricing
Take a look at your budget. Shop from as many dealers as you can. Compare quality against the price. While you may want to go for the cheapest stores around, remember not to compromise on quality. There’s nothing as spooky as having to spend more bucks in replacing a part that you bought less than a month ago. Also, if you get hold of a reliable supplier, work with them on a long-term basis. This may go a long way to giving you bargaining advantage with them.
Fetch for knowledge
To make it easier for now and future auto spare purchases, work closely with reputable suppliers. Let them not just provide quality and cost-effectiveness. Strive to acquire some expertise from them. They should tell you how to differentiate between parts of car models. Get more information on how to identify what is quality and what is not.
Shopping for auto parts from local dealers can be a savvy approach. Therefore, avoid going for direct shipping from overseas, especially when you want just a few of them.
June 21, 2018
A good cruise on your motorbike starts with great maintenance of your ride. Bringing it to your favourite repair shop is always a good idea. But even at home, there are specific steps you can take to maintain your vehicle.
That is why regardless of the season, you should always take these three steps to maintain your motorbike properly.
Care for the machine
More than the body, the off-road motorbike’s engine is one of the crucial points to take care of. You should never use water on the bearings, as this can lead to corrosion after too much humidity build-up. It is also necessary to use a transparent protective spray for aluminium parts that are not painted.
These parts include the engine and the transmission housing. For any exposed metal parts, it is best to clean them using a chromium polish.
Use cleaners over water
Washing your off-road motorbike is necessary to maintain its parts and keep away debris and bugs – but you should do this in moderation. Unless the motorbike has been through a rough off-road ride of mud and grime, it is best to hold off on soap and water and go for motorcycle-specific cleaners.
These cleaners have specific formulas tailored for the metals, plastics and other materials in your motorbike. Plus, it does not take away the wax, saving you time and resources for re-waxing.
Check all your bike’s fluids
The harshness of winter in New Zealand can be a deterrent to proper protection and care for your off-road motorbike. As such, one crucial step to include in your bike care is to double-check fluids and fill them up when necessary.
You need to fill the fluids for the brake, the clutch and the coolant. It is also a good idea to check the antifreeze so that the engine will not freeze up while driving through sub-zero environments. In line with this, make sure to get rid of old oil, which can become dirty and thick, causing serious damage to your motorbike.
These are the basics when it comes to caring for a motorbike. Paying attention to these small details is responsible management and maintenance that will ensure you of a smoother ride.
June 4, 2018
A metal fabricating workshop can be a dangerous place for someone who doesn’t know what goes on inside. There are many big and heavy machines, equipment, and vehicles used in and around it that you won’t usually see inside any warehouse or workshop. One has to be well versed in the industry to be safe in a place like this.
So, whether it’s operating a Baileigh sheet metal brake or wielding a sledgehammer, you wouldn’t want to make these four mistakes that negligent metal fabricating companies do that put their staff in danger.
1. Neglecting Safety Gear
Safety should be the number priority in a workshop. That’s why personal protective equipment (PPE) must be a requirement in yours. Make sure your workshop is equipped with the right gloves, hardhats, protective boots and eyewear, and all other necessary gear to keep your workers safe during work hours. It may feel uncomfortable to wear at the beginning, but it would be more uncomfortable if they get injured.
2. Using the Wrong Equipment for a Task
Every piece of equipment and every machine in a workshop has its own purpose. This is a place where you can’t use a big machine to do a small task. It’s dangerous not only for your workers but for your equipment as well.
3. Not Encouraging Presence of Mind
Part of your responsibilities as a fabricator is to find ways to encourage your workers to always pay attention to what’s going on around them. Your workshop is no place to be daydreaming. So, come up with training or seminars that can help you workers understand the importance of having a presence of mind during operations.
4. Not Conducting Regular Training
Training your workers as part of their onboarding session is crucial to familiarize them with how you work. But it’s also important that they get proper and regular training again after that as your processes and machinery change.
Remember that your workers are the backbone of your operations. Keeping them safe means keeping them happy and productive. Be a responsible metal fabricator by making workplace safety your top priority.
May 7, 2018
A recreational vehicle (RV) contains spacious compartments that can fit many people. RVs usually also have basic amenities, such as bathrooms, kitchen areas and sleeping quarters.
Because it’s a vehicle with large carrying capacity and has many built-in features, this requires you to ensure its maintenance — whether you need RV parts in Fort Worth, TX or anywhere else in the world. Here’s a guide from Quality RV Solutions to getting your RV expertly checked.
1. Test out the water system.
Your RV’s water system is important because it allows you to drink, wash and bathe while you’re on the road. Check the water system to see if there are leaks that need to be sealed or if there are clogs to be unclogged and other plumbing matters.
2. Inspect the roof area.
The roof of an RV endures various outdoor elements — sunshine, precipitation and winds — when you’re driving. Inspect the seams and seals of the roof and make sure there are no holes. This would ensure you won’t get leaks during rainfall, which could lead to water damage inside the RV.
3. Check the tire parts.
An RV’s tires are designed to withstand the vehicle’s large carrying capacity, but it can lose efficiency if left unchecked. Make sure they have enough pressure or air in it so it won’t go flat. Make sure lug nuts tightly secure them. Doing so would avoid any potential road accidents.
You need a professional repair team to help you with tasks such as replacing its filters used in removing impurities from its oil fuel or air conditioning systems. If the filter gets too dirty, this might cause overheating, which burdens you with additional costs.
A large vehicle such as the RV has as many components as an actual household. As such, it needs regular maintenance. As long as you care for your RV properly, you’ll spend more time with the family while saving money.
August 2, 2017
Are you looking for cars for sale here in Raleigh? Before you go for the typical passenger car, you can consider buying a used sports car instead. It may seem a ridiculous decision, but you can benefit from purchasing a sports car over a common passenger car.
Risks of Used Cars
Buying used cars always brings up the risk that comes with used cars. Arguments against buying used cars usually point to the risk of a car that has sustained more damage than advertised. When you purchase such a car, you could end up with more expenses than you expected. A used car also comes with more stringent and riskier financing.
Reliability Outweighs Risks
In spite of the risks, you can find many reliable used vehicles here in Raleigh as long as you know how to look for them. Used sports cars count among the most reliable used vehicles. This reliability comes from the higher quality materials and production that these vehicles received in the past half century.
Less Wear and Tear
In addition to the higher vehicle quality, past owners of used sports cars have usually driven the vehicles far less than more common types of vehicles. Based on a Long-Term Quality Index that surveyed 1.4 million used sports cars, the vehicles have proven more reliable than the industry standard. Vehicles such as the Chevrolet Corvette, Dodge Challenger, and many others ranked high.
The reliability of used sports cars also come from the higher investments past owners gave to maintenance. As such, even older sports cars have received religious care that puts them in excellent shape. Newer models of sports cars also have parts that last far longer than your typical passenger cars.
A used car dealership here in Raleigh can help you find a great used sports car that are cheap and can last you for a long while. A pre-owned sports car can be of great use to you and can even save you some money.
June 27, 2017
Ideally, car tune-up should be holistic. This means that each component of your vehicle, from the engine to the exhaust pipes, should undergo professional inspection. After all, the goal of the whole process is to ensure utmost road efficiency, especially for cars that have already accumulated considerable mileage.
But in cases of limited time and budget, you should at least prioritise these four components: engine, transmission, brakes, and suspension.
Engine tune-ups you can get from shops such as LRC Automotive are crucial to keeping your car as efficient and economical as possible. You should do this every after 30,000 miles of covered distance.
Areas of concern include spark plugs, compression ratio, battery cables, intake manifold bolts, accelerator linkages, air inject system, and steering system. Problems solved after engine tune up include engine vibrations, mechanical noises, and crankshaft thumping, among others.
Whether you drive stick or automatic, regularly checking your car’s transmission system is crucial for a good trip. If you have sufficient car expertise, this is something you can do on your own. Your goal here is to make sure that your transmission fluid is at the right level and looks safe enough.
For more advanced transmission concerns, it is best that you work with a professional mechanic.
You will know that your brakes need an immediate tune-up when you notice any or all of these problems: worn pads, strange sounds, pulling, vibrations, and temperamental pedal. Brakes are especially crucial because they have a direct effect on your car’s road safety, hence should never suffer neglect.
Suspension issues can be evident by doing a short test drive. What you need to be wary of are instances when your car sways and bounces on low speed, squeaks or pulls during turns, and if the nose-dives as you hit the brake.
You can also find signs of compromised suspension on your car tires’ tread and shock towers.
You should follow a car tune-up schedule religiously. This is your way to keep safe on the road.