A Leading Pitstop for Auto News Online

finishing metal working on a lathe grinder machine June 4, 2018

Metal Fabricators: Don’t Make These 5 Mistakes

A metal fabricating workshop can be a dangerous place for someone who doesn’t know what goes on inside. There are many big and heavy machines, equipment, and vehicles used in and around it that you won’t usually see inside any warehouse or workshop. One has to be well versed in the industry to be safe in a place like this.

So, whether it’s operating a Baileigh sheet metal brake or wielding a sledgehammer, you wouldn’t want to make these four mistakes that negligent metal fabricating companies do that put their staff in danger.

1. Neglecting Safety Gear

Safety should be the number priority in a workshop. That’s why personal protective equipment (PPE) must be a requirement in yours. Make sure your workshop is equipped with the right gloves, hardhats, protective boots and eyewear, and all other necessary gear to keep your workers safe during work hours. It may feel uncomfortable to wear at the beginning, but it would be more uncomfortable if they get injured.

2. Using the Wrong Equipment for a Task

Every piece of equipment and every machine in a workshop has its own purpose. This is a place where you can’t use a big machine to do a small task. It’s dangerous not only for your workers but for your equipment as well.

3. Not Encouraging Presence of Mind

Part of your responsibilities as a fabricator is to find ways to encourage your workers to always pay attention to what’s going on around them. Your workshop is no place to be daydreaming. So, come up with training or seminars that can help you workers understand the importance of having a presence of mind during operations.

4. Not Conducting Regular Training

Training your workers as part of their onboarding session is crucial to familiarize them with how you work. But it’s also important that they get proper and regular training again after that as your processes and machinery change.

Remember that your workers are the backbone of your operations. Keeping them safe means keeping them happy and productive. Be a responsible metal fabricator by making workplace safety your top priority.

Offshore Oil rig April 23, 2018

How Does NZ’s Ban On Offshore Oil Projects Affect the Energy Sector?

Energy companies may no longer launch offshore oil drilling projects by 2030, following the government’s decision to stop exploration work on the country’s 27 oil fields.

Whether or not the country depends less on fossil fuel, recycling will continue to be relevant for environmental reasons. Services such asa vacuum truck for hire or petroleum recovery will still be important for waste disposal among energy producers.

Balancing Effort

The government said that the ban aims to strike a balance, which means using other forms of energy. However, the energy industry believes it will do little to curb emissions or affect demand and supply in the country and abroad.

Despite the opposition, New Zealand leaders remain steadfast on the rule. Existing permits will continue to be valid until the specified date. The only reason to lift the ban would involve a discovery in one of the oil fields, which may pave the way for production. In the meantime, using more oil leads to a bigger pile of plastic waste at landfill sites. Some companies have experimented with the idea of reusing old plastic containers as a material for paving roads and industrial surfaces.

Reusing Oil Containers

According to the International Energy Agency data in 2017, global oil consumption would surpass 100 million barrels per day over the next two years. Consumption will further increase by 4 per cent in 2022. For this reason, recycling containers from petroleum by-products and crude oil will be more important.

Some research efforts for recycling include a process involving granulating containers, which are then added to a binder for the production of asphalt grade bitumen. The resulting product could then be used as a road or industrial pavement.

Conclusion

The ban on offshore oil drilling may be a setback, but oil will likely continue to be a major energy source given the forecast increase in consumption. At the same time, more recycling efforts should be in place to handle expected increase in by-product waste.

A businessman planning a brand strategy December 6, 2017

Top Ways to Improve Your Company’s Branding

Branding now plays a major role in a company’s success. You can’t thrive if you don’t invest in proper branding techniques.

Advantagemanufacturingltd.com shares some strategies that you should incorporate into your branding initiatives.

Make Your Products Unique

You can check out different manufacturing companies and find out how your products can be specifically created to carry your brand. This can be something as simple as having your own label or creating unique containers and freebies. By doing so, you can improve your company’s reputation – especially if no one else offers what you are offering. A good case in point would be McDonald’s toys included in their kid’s meals.

Know Your Market

You won’t be able to please anyone, which is why large corporations develop different commercials for different countries that they serve. While you may not have the budget for it, you at least have a good idea of who your clients are. Focus on appealing to this market and forget the rest for the moment. This way, you can be sure that your brand will make its mark in a specific group.

Make Your Business Sticky

Sticky is a tough formula to hit – but it’s definitely a recipe for success in many companies. Being sticky means your brand of marketing will ‘stick’ or will easily be remembered. For example, the commercial “Marlboro tastes good, like a cigarette should”, manages to remain embedded in people’s mind long after the commercial has ended. The stickiness factor can be achieved through different routes, such as making your tagline funny, witty, useful, or others.

One Time Chance

Once you’ve decided on a brand approach, be sure to lock it in and commit towards not changing it for a specific period. Branding takes time – you can’t expect it to become a household name overnight. This is why developing your brand, as well as choosing the colors, logos, taglines, and approaches should go through ample processing before the release.

Want to improve your company’s reputation? Follow the tips given above and you can never go wrong.

October 10, 2017

Going Green with Geothermal Heating and Cooling

If you end up worrying about your energy bills every month, you might want to switch to geothermal heating in Pennsylvania. With its low operating costs and effective heating and cooling system, switching to geothermal can save you a ton of money.

How does a geothermal system offer effective heating and cooling?

The earth has insulating properties. This means that underground temperatures do not fluctuate as much as the outdoor temperatures. Temperatures a few feet below the earth are consistent all year round.  A geothermal unit consists of a system of pipes and an indoor unit that uses these constant underground temperatures to create free energy. The pipes are polyethylene-made and lie either vertically or horizontally depending on the construction site. If you live somewhere with plenty of groundwater, you can also opt for an open system.

Heating and Cooling During Winter and Summer

During winter, the fluid in the earth loop absorbs heat from the ground and transfers it indoors. The indoor unit then compresses the heat before distributing it evenly in the house. During summer, the system takes heat from the indoor space and deposits it into the aquifer for cooling. This means your geothermal system can regulate your home’s temperatures regardless of the climate.

Geothermal heating and cooling systems are environmentally friendly as they reuse the earth’s natural heat instead of burning fossil fuel to generate energy. You only need to use electricity to power the pump, fan, and compressor. Once you install this system, you can expect savings of up to 40-70% on your annual bill. Having a geothermal system not only saves you money, but it also saves the earth as well.

July 27, 2017

Guide to Growing Your Metal Fabrication Startup

Welder working on a metal frameFor passionate welders and fabricators, the thought of starting their own venture is an appealing one. Unfortunately, running a metal fabrication business calls for more than just excellent welding skills. You need good business skills and adequate knowledge to make it in such a competitive industry.

Here are some tips to guide you along the way:

Get adequate financing

Obviously, you’ll need space, equipment, and personnel to run the operations at your workshop smoothly. Before you make enquiries on the cost of hiring a place, buying a drilling and tapping machine, employing a welder, or any other expenses, call several banks or lenders to find out if they’re willing to provide the financial support you need.

Hire the right personnel

Unless you’re a one man shop, you’ll need a competent team to help you run your organization. Get a good accountant, a reliable attorney, and an advisory committee. Find experienced welders to help with the main service you provide. Work to promote a culture of cooperation and commitment, so you can achieve your vision and goals as an organization.

Provide superior service

As you are just starting out, you need to do things right. Provide the highest quality products, ship them on time and make your prices as fair as you can. Do your best to prove to each of your clients that you value the business they’re giving you. Thank them every time you do business with them. Make follow-up calls to find out if you are satisfying their needs.

Organize your business

Grow your business by keeping everything at the workshop well organized. Clean the shop regularly, so that everything runs efficiently and smoothly. Be sure to keep any paperwork properly filed and stored.

Your fabrication business can yield great returns if you run it well. By applying a few simple business skills, you can increase your chances of becoming successful.

June 30, 2017

South Australia Finds Hundreds of Potential Pumped Storage Sites

Researchers from the Australian National University (ANU) discovered hundreds of potential sites in South Australia that can be used for water storage development, which can support other renewable energy sources such as solar and wind power.

The ANU team found 185 areas in the state that could support a sustainable, safe and cheap electricity grid, according to the study’s lead researcher, Andrew Blakers. The study would further look into the viability of using the identified sites by conducting due diligence, which will be based on land ownership, engineering and environmental factors, among other criteria.

Global Support

Blakers said that pumped hydro energy storage is responsible for 97 per cent of the world’s energy storage. For instance, hydro storage development projects are indirectly essential for farm machinery in Australia, as well as other industries that greatly depend on water supplies for daily operations.

The study listed the potential sites outside national parks and urban areas. It received a funding grant from the Australian Renewable Energy Agency for the development of a nationwide atlas for identifying possible off-river hydro storage sites.

Urban Planning

When it comes to water policy, Perth has implemented an effective strategy for keeping a stable supply of drinking water. Local authorities in the city found a way to solve a dry spell on its dams and other reservoirs in the form of aquifers.

The city has increasingly relied on ground water due to the declining supply of rainfall in dams over the last several years. For instance, an ongoing project involves pumping recycled sewage into Perth’s aquifers as a way to boost drinking water supply. This and other initiatives allow the city to have an additional supply of 178 billion litres of water.

Hydro storage development projects are important, as the demand for electricity continues to grow worldwide. These initiatives will also help the environment by advancing other sources of renewable energy, such as wind and solar power.

Fuel June 9, 2017

Improve Your Fuel Sales With 2 Moves

While the demand for fuel is on the up and up, high levels of competition make it difficult for some player in the market to turn a profit. As such, you need to take proactive measures to keep your business operations afloat.

Luckily, some of the business strategies to give your business an edge on the market are easy to implement.

Ensure quality fuel

Despite promising good returns, adulterated fuel is the easiest way to ruin your business. The additional chemicals pose a considerable threat to the car’s engines, causing your customers to incur hefty repair bills. Moreover, it could lead you to suffer severe legal trouble as well. Complaints from your clients are likely to attract the attention of the inspectorate services. A compliant officer only needs to carry an impromptu inspection, and your goose is cooked.

Hence, you should make every effort to purchase quality fuel and store it in superior fuel storage tanks. Excellent storage tanks lower the chances of contamination and loss of the valuable product. Water leaking into the underground tanks can cause you to incur massive losses.

Have a delivery service

Given its flammable nature, there’s a considerable risk when handling petroleum fuel. More than just keeping your premises safe, you can undertake to keep other people safe as well. Outdoor construction sites often require a good supply of fuel to power their numerous earthmovers. Many often opt to keep their reserve fuel in drums oblivious of the danger such a practice poses. With a couple of superior mobile fuel tanks from Durotank, you can help such workers stay safe and grow your sales.

Mobile tanks provide a safe and convenient way to transport flammable liquids to an offsite location. Additionally, they enable you to dispense the fuel efficiently to eliminate wastage.

While fuel remains a lucrative business venture, the competition is cutthroat, and this could have your business at a disadvantage. Ensuring that you dispense top quality fuel and meeting the unique customer needs can give your business an edge on the market.

 

June 5, 2017

Clean and Maintain Your Plastering Tools

Whether you’re a part-time or full-time plasterer, you need to keep your tools clean and well-maintained to make sure your projects turn out well. There are many plastering tools for sale, and you can enjoy a wide variety at reasonable prices from your local hardware shops. You can properly clean and maintain your drywall tools with the following suggestions.

Scrape with Care Before Soaking in Water

Using your putty knife or drywall taping knife, try to get rid of the dried compound from your plastering tools. Get a large bucket that is big enough to submerge the tools whole. Fill it will water and soak the plastering tools for 20 minutes. The dried compound will become loose enough. But if you still have some dried compound stuck, try to soak for a longer period or use your putty knife to scrape it off again. Use a dish scouring pad to clean your tools. Make sure you don’t use a steel wool brush as it can scrape the metal.

For Stubborn Compound, Use a Concrete Dissolver

You can also try a solution called a concrete dissolver to break up the chemical components and loosen stubborn dried compound. Simply spray the concrete dissolver. It will foam up. Wait 15 minutes before wiping the mushy gunk off. If it doesn’t do the job, let the solution soak for 30 minutes. Of course, this is more expensive than using just plain water, so use appropriately.

Prevent Your Tools from Rusting

Use a rust inhibitor to prevent your drywall tools from rusting. There are many brands available in the market, but if you don’t want to spend money on this, you can use WD-40. Give it a good coating before storing your tools in a dry place.

Make Your Drywall Tools Last Longer

The better you take care of your tools, the longer you can use them, and the better your plastering projects will turn out every single time.

A man working on a heating systems May 27, 2017

Hydraulic Separators: Why is it Efficient and Compact

Boilers are central to heating systems of different kinds, and until recently, many were of cast iron. It is not easy to substitute them for anything else as they can cause problems, such as interference between circulators operating together.

Hydronic balancing is an important part of distribution optimisation of water in buildings’ HVAC systems. This balance ensures that the climate indoors is at an optimum condition by using energy efficiently and reducing operating costs. This is possible with the use of hydraulic separators.

What Are They and What Do They Do

Hydraulic separators prevent air and dirt in the system. Installing a hydraulic system is like having every circuit acting as a “stand-alone” unit.  It works by separating primary and secondary piping with the help of tees that are close together.

This concept is standard in many secondary circuits, served by a single primary loop.

How They Work

Hydraulic separators offer the following advantages when they work in conjunction with primary and secondary piping:

  • Remove unwanted dirt and air particles in the HVAC unit
  • Prevent damage to other components in the system, thereby preventing more costs on repairs
  • Work flawlessly with smaller boilers, currently in use
  • Cope with higher flow resistance

The units currently available on the market are small enough to save space, made from copper, work well with heating systems that use oxygenated water, equipped with wall brackets, and have a port which can get rid of sediment easily.

Hydraulic separators are popular in new building projects as well. Used to renovate old cooling systems to boost efficiency, this unit works with temperatures ranging from 0-110˚C and at pressures ranging from 0-10 bars. You should try one now today.

Scissor lifts that was bought by the owner May 23, 2017

Access Equipment for Hire: Makes More Sense than Buying

For some business owners, purchasing their own access equipment makes more sense. No need to worry about renting fee; buying your own equipment ensures convenience and lowers costs.

The choice of buying, hire-to-buy or renting the right equipment depends on the project’s needs and circumstances. But before you finalise your decision, examine the benefits of long-term leasing or equipment rental.

Renting: The Inexpensive Option

Large amounts of inventory take its toll on your carrying costs; the addition of access equipment might not do the inventory good either. When you choose equipment for hire, the decision frees up capital, which you can use in other areas of the business — meaning better returns.

One of the greatest benefits for rental is the options. Premier Platforms, provider of cherry picker for hire, says clients are free to choose solutions for long-term or short-term. This way, you need not put up with (or maintain) the equipment once you are done.

For some businesses, it is easier to raise capital when equipment purchase is not necessary.

Access to Updated Technology

The field of working heights continuously changes. The constant evolution encourages fleets and suppliers to regularly update their roster of products. On your own, it is more expensive to purchase up-to-date access equipment compared to renting one.

Selecting equipment for hire can offer your business access to larger inventories, and allow you to stay ahead of the curve. With more efficient and newer models, your business need not put up with obsolete or old equipment.

Resolved Maintenance and Repair Issues

Access equipment for hire also takes charge of maintenance and repair. Your organisation does not have to concern itself with servicing the equipment monthly or annually. Equipment breakdowns do not call for emergency disruptions in operations; suppliers will attend to the concern immediately.

When you hire equipment from reputable suppliers, it is one less burden off your shoulders. You have more time to focus on the business rather than the equipment.