June 23, 2017
You can leave your Porsche’s scheduled maintenance to professionals here in New York City, such as Formula Motorsports, but you can be responsible for the washing, shining, and detailing of your beloved vehicle.
Of course, although professional cleaners can also do the washing and other work for you, there may be no better way to show your love to your vehicle by doing the work yourself.
Now, you first have to learn how to wash, wax, and detail your car properly to do it well. When you try to perform the work without learning first, you may damage your vehicle’s paint and shine instead. To wash, wax, and detail your Porsche properly, you can follow the guidelines below.
First, you have to bring your car indoors or under a shade whenever you wash and wax it. Washing under the sun can cause the water to dry much quicker than you can wipe it off. When the water dries, you will have rain spots on your vehicle. Drive your Porsche into the shade to block off sunlight.
Wash and Dry
Next, you can wash your car like any other average car owner. When your vehicle has rain spots, however, you can simply apply the shampoo directly and wash it for last to let the chemical thoroughly remove the stain.
Once done with washing, you can blow dry your Porsche; a blower or dryer works best in drying your vehicle since it eliminates the risk of scratching your vehicle.
Layer the Wax
Now, when it comes to waxing, to achieve the best shine, you can layer car wax products. One car owner used Carnauba wax over a paint sealant, and he produced a rich, deep shine from his Porsche. You can try the same with your Porsche, but only if the paint has been maintained, cleaned, and polished.
You can ask your people at the maintenance service here in New York City for any tips that you can use in taking care of your beloved Porsche.
June 13, 2017
For off-the-road fleet owners and operators, constantly replacing truck tires is a critical component of safety and security management. For the uninitiated, old and worn-out tires may still look fully-functional. However, those within the trucking industry know exactly when they should put in a new set, as they understand the safety risks of delaying replacements.
The weight and load of heavy duty vehicles put a lot of pressure on the tires, and while built for such purposes, it doesn’t automatically mean they last forever. So what happens to them? It depends on a lot of things, but environmentally-conscious fleeting companies have these components sent out to an OTR tire recycling service.
Ongoing Tire Manufacturing and Its Environmental Impact
Green fleeting companies understand that the continuous manufacturing process of tires put a huge toll on the environment, particularly on the available resources. While there is an abundance of raw materials, replenishing them takes a long time. Their high utilization – around 200 raw materials for every single tire – in everyday industrial applications put them at risk of complete depletion.
Environmental Effects of High Energy Consumption in the Tire Manufacturing Industry
There is also the concern surrounding the high energy consumption in the tire manufacturing process. Use of massive amounts of energy means greater consumption of fossil fuels, which then further increases the risks of climate change and global warming. Reducing the demand for the creation of new tires can result in minimized environmental hostility.
Recycling Lessens Not Just Consumption, but Also Waste
Waste products are some of the leading causes of various types of pollution, including those that affect land, water, and air. So just imagine how big of an impact old and unused tires have.
Recycling, when carried out properly, contributes significantly to the lessening of both resource consumption and wastage. OTR fleet owners and managers should implement this green practice and contribute to saving the planet.
May 25, 2017
April 6, 2017
Regardless of your business, there will be times when you need to rent extra vehicles to make your deliveries. It is now a growing trend amongst business owners and companies to buy a few vans and lease or rent a fleet based on need, such as those from Little Green Truck. There are e a lot of benefits to hiring trucks for your service needs.
Benefits of Truck Hire
Many small and medium-sized businesses don’t have the finances to invest in a commercial van. Buying, paying insurance, hiring drivers and maintaining vans require a large capital outlay which many cannot afford. Leasing or renting is a better option as they not only have access to the newest vans and trucks but also their maintenance depends on the rental company.
2. Contractual renting
Signing a contract with the rental company will save a business the headache of looking for trucks when they have a lot of work to do. It is a good idea to check what the rates are going to be because rental companies usually take retail price and the depreciation of the value of the vehicle when quoting prices. Prices may fluctuate based on the residual value of a vehicle.
3. Fixed budget
Having a fixed budget for truck hiring will help companies manage their budget better. All a renter has to do is ensure their drivers are up to date with their driving skills and licenses. The other expense that they are responsible for is fuel.
There is no doubt that renting trucks and vehicles are better and a more cost efficient option for many businesses. There are a lot of rental companies who could offer you great rates and service.
Starting a business is not cheap. Many business owners spend thousands trying to start their companies. If you are considering starting your firm, there are ways you can do it without breaking the bank.
Do not overlook a used company car
If your business will deal with delivery, consider purchasing used cars dealers in Petoskey. Used cars are typically more affordable compared to brand new cars. You can easily buy a used far for hundreds, even thousands less than a new vehicle.
Make sure to apply logos to the car to help advertise your business while you are out fulfilling delivery requests.
Invest in custom business software
Although it might cost a bit more initially, invest in custom business software for your company. According to Forbes, it is cheaper to buy off-the-shelf software, but they lack necessary features to help your business make money.
In the long run, you will end up having to upgrade to custom software or purchase several types of off-the-shelf software. Save yourself the time and money by going with custom software from the beginning.
Peruse cheap or even free social media business accounts
Social media is a wonderful way to get the word out about a new business, product, or service. The same is true for you and your business. Make sure to set up a business profile page on social media sites like Facebook, Twitter, Google+, Pinterest, and LinkedIn.
You will quickly find that social media sites offer business accounts for either free or a very low monthly rate, which can help save you money.
Spend less on logo and web designs
Although it is important to have both a logo and a website that captivates as an attention getter, there is no need to overspend on the logo and web design. As a startup business, there is nothing wrong with keeping your website simple.
There are plenty of free or relatively cheap website platforms for you to use. Wix is often a smart choice, particularly since it offers link-building tools for SEO purposes.
Although there are areas where you will have to spend more than planned, you can always cut corners and save funds. Opening a business can be stressful, but it does not have to be, particularly if you can keep the entire ordeal within your budget.
March 31, 2017
Many companies in New Zealand grapple with skyrocketing business expenses, not knowing that it only takes a little bit of effort to minimize necessary spending. The key to a successful business hinges on keeping the overhead costs low and manageable.
This article highlights some of the things you should avoid to lower running costs and prevent unnecessary losses.
Producing more products than you can distribute amounts to a double tragedy. It means that you tie too much of your working capital in unsold or unsellable inventory. As such, you might start facing cash flow crunches that could threaten to put you out of business. Similarly, producing too much product takes a toll on your equipment and machinery. It places additional strain on the parts, causing them to wear out quickly. Such occurrences increase the likelihood of a breakdown. Additionally, you tend to incur a fortune in storage charges to house your excess inventory.
Improper maintenance routine
Wear and tear is a common issue in the manufacturing scene. However, they should be manageable with proper care and maintenance. Other than the machinery, you need to safeguard your storage tanks and distribution pipes from corrosion. Corrosive chemicals such as acids tend to cause severe damage to your infrastructure if left unchecked. Seeking the help of a corrosion control specialist is still the most responsible thing to do, Euro-Blast NZ Ltd suggests, especially when metal parts of your equipment start to show some indications of corrosion. Such experts help you to design and install perfect systems that can resist corrosion.
Not hiring professionals
Studies show that skilled workers build a safe workplace environment, cause less damage to your equipment and increase productivity. Make sure to hire the right kind of people and carry out on the job training frequently. Other than keeping your productivity high, good workers have fewer injuries.
The key to remaining competitive in a challenging market is the need to streamline production and keep the overheads low. Luckily, you have a set of different measures to help you with the process.
March 28, 2017
Asbestos was an indispensable material before its ill effects on human health hit the headlines. The fibrous material, which is made of silica, is corrosion-resistant. It can withstand heat and fire with ease and provides efficient insulation. Although it appeared to be so useful, it has a fatal flaw.
Recently, New Zealand joined a long list of nations that have banned the material and is taking steps to reduce exposure to it. Many technologies such as industrial dust collectors reduce exposure to asbestos.
A Glorious Past
Before its name struck fear, asbestos was considered to be a crucial material with many applications. Use of the material skyrocketed during the 19th century. That’s when its commercial use blossomed. Between 1900 and 1910, asbestos production tripled, reached a staggering 10,000 metric tonnes a year by the end of that decade.
Being cheap, reliable and incredibly resistant, asbestos was put into everything. It was added to cement, fire-retardant coatings, paint, plasters and insulation for homes and offices. It was also used in machinery production, and it became a crucial component of cars and aeroplane parts as well as for insulating electronic wires.
Asbestosis and Cancer
The first death directly attributed to asbestos was recorded in 1906. Since then, the devastating effect of the material on human health has been well documented.
When asbestos is loose, it can break apart into tiny, microscopic fibres. The diminutive size allows the fibres to penetrate the deepest tissue in the lungs. The damage that is caused leads to a disorder that has been named after the substance: asbestosis. Asbestosis is known to lead to cancer.
A Costly Problem
Asbestos has been integrated into the construction of buildings. Many structures in Australia still contain trace amounts of the material. While deeply buried, asbestos is benign, however, removing it can release particles into the air, leading to risk of inhalation. Just recently, a primary school in west Auckland that planned to remove asbestos in their structures caused great fear among parents.
There are currently many safeguards and regulations that govern the presence, use and removal of asbestos. Despite being such an amazing material, the effects of asbestos on human health has made it impossible to use. However, given the problems of safely removing asbestos, only time will tell if cities will ever become asbestos free.
March 20, 2017
The amount of money you spend on your energy bill every month can keep you down over time. Fortunately, there are numerous ways to cut back on these expenses. By implementing these few changes in your business, you can reduce the energy you use and save some cash in the process.
Use cooling water systems
A water-cooled system is incredibly energy efficient. The system, when fitted with a side stream filter made for the cooling tower, uses a significantly lower head pressure and much less energy compared to an air-cooled system.
Moreover, since outdoor elements such as rainfall, snow and heat do not affect water-cooled systems, they are more durable. Hence, you spend less on energy bills and maintenance while keeping the environment safe.
Seal any air leaks
Air leaks in the building can lead to loss of heat from the office or allow cold air inside. As a result, you are required to spend more energy to keep the workplace warmer during the winter and colder during the summer.
Identify and seal all cracks and openings in your building to keep the indoor conditions more stable and avoid unnecessary power costs.
Make it official
Let your employees know that saving energy is a requirement at your workplace. Cultivate a culture of energy efficiency so that all employees practice energy saving activities at all times. Ensure that your staff switches off lights that are not in use and unplug switched off electronic devices to save power.
Check your lighting situation
Are you still using incandescent lights in your buildings? Make the switch to fluorescent and start saving on energy. While fluorescent bulbs do not necessarily cost more than ordinary bulbs, they are far more efficient and durable.
Becoming more energy efficient has benefits on both your bank account and the environment. By changing a few things in your establishment, you can achieve this goal within a short time.
March 15, 2017
Performing regular checks and maintenance is the essential rule every car owner
should remember. It ensures a happy ride, which can last for longer miles. Aside from that, it’ll prevent major problems that may force you to spend a hefty amount for repairs.
If you ask anyone who’s worked on cars before, they would probably say the same thing — preventive maintenance is an important step to keep your ride running smoothly. This is why you must at least know the basics. To help you do that, here’s a list of them:
Start with Tires & Wheels
Check and rotate your tires every time your car reaches 5,000 to 6,000 miles. It’s during this mark that you’ll notice significant changes in the tire pressure, which can affect your car’s performance. While you’re at it, don’t forget to also look at the tread depths to see if they need replacement or alignment services from an expert in Arvada, CO. Doing these simple tire and wheel maintenance improves the efficiency and handling of your vehicle.
Check the Fluids
The next thing on the list is checking the fluids. Do this once a month or depending on how often you drive your car. By maintaining the right level of fluids in your engine, you’ll less likely to experience troubles or difficulties in driving. The fluids that need regular checking include:
- Brake Fluid – This is responsible for keeping your brakes working efficiently.
- Coolant or Radiator Fluid – It works as an anti-freeze in your engine to reduce the risk of overheating.
- Engine Oil – It keeps the moving parts in your engine lubricated and smoothly running.
- Power Steering Fluid – It improves your control and handling on the steering wheel.
- Windshield Washer Fluid – Its main function is to steer clear your front and rear view to avoid distractions as you drive.
Inspect the Electrical
Battery troubles are the number one cause of breakdowns on the road. It may be due to low power or problems on wiring. Regardless of the cause, it’s advisable that you examine the wiring, battery source, and spark plugs to see that your car is getting enough power supply. You’ll spot these issues easily by turning on the headlight or honking your car. If the lights are barely lighting up or the honk sounded weird then maybe it’s about time to change the battery.
These are only some of the maintenance services your car needs. Don’t wait until something serious happens, perform regular tune-up or visit the nearest auto service center in your area to ensure that you’ve got everything covered in your car. This will guarantee you a safe, comfortable, and peaceful trip on the road.
March 1, 2017
Oil or gas in storage tanks emit vapors that can still be used and sold for profit. To take advantage of such vapors, and to minimize waste, oil and gas companies use a vapor recovery system. This system extracts the emissions through a scrubber and subsequently returns the trapped liquid to pipelines or storage tanks.
Reevaluations in the Face of Price Fall
You probably know the importance of vapor recovery units and other systems in an oil and gas facility. These systems come at a price when constructed in the field. With the recent drastic fall in the prices of crude oil and natural gasses, however, many facilities and companies have reevaluated system construction in order to restructure capital projects.
Modularization Trending Now
The process systems you knew were likely field constructed, but time has changed. Modularization is the new trend. This method involves prefabrication of process systems in a controlled off-site environment. In Texas, you can find a company that offers modular process skid products to help you understand how modularization works.
Savings and Other Benefits
Modularization can bring numerous benefits to process plants and facilities. You can order a modular vapor recovery system and save money otherwise used for labor in field constructed systems. Modular process skids can also help when construction labor is difficult to acquire in your location.
Like all innovations, challenges hound modular process skids. The required upfront planning is higher and you will need to coordinate with different parties over engineering activities. Shipping is another issue. In spite of these challenges, experts highly recommend modularization to improve schedule, project development, execution, and several other reasons.
To overcome these challenges, you can train yourself to be aware of all the upfront planning required for modularization. You must learn how to manage the coordination of engineering activities with different groups. With adequate training, you can make modularization work for your oil and gas plant or facility.
February 25, 2017
Whether you are relocating just across town or to an entirely different area, preparing your belongings, packing them, and moving them on your own could be the cheapest option for you. With a well-planned DIY move, you could rent a UTE, van or truck as well as loan and unload your stuff wit help for your family and friends.
Here are some practical hacks for loading your hired vehicle:
- Start as early as you could. Park the vehicle as close to the most strategic door as possible. Get a loading ramp and then position it on a cemented area or the highest step.
- Don’t forget to make a clear list of all your items and boxes as you’re loading it on the vehicle. Make sure to number everything with a marker for easy identification.
- Load your stuff one corner at a time and make certain to pack it solid and tight from floor to ceiling, if you’re using a van or truck, and tie off every quarter with durable rope to the UTE or truck’s side rails.
- Ensure that the bulkiest, heaviest, and durable items are at the bottom, with the lightest and fragile ones on top.
- Utilise your pillows, clothes, towels, linens, and curtains for padding your boxes and awkward spaces in the truck bed.
- Place all flat and huge items such as padded mirrors, tabletops, box springs, and mattresses upright against the sides and secure them with rope.
- Slide all rolled up carpets and rugs lengthwise in the centre space or side spaces.
- Never lift something if you’re not confident about lifting it by yourself. Always ask for help, especially with bigger items.
Once your truck, van or UTE is loaded up, it’s time to drive away. If your hired vehicle doesn’t come with a driver, and you’re driving the vehicle yourself, note that driving a bigger vehicle is very different from driving a car. Adjust the right and left rear-view mirrors to your liking, as well as the steering wheel and seat. Make sure that all doors are locked.
Pay close attention overhead as trucks and vans are taller than average cars. They’re likewise wider and longer so be alert when turning. Bigger vehicles also need more braking distance so be careful when you change lanes and turn.